How to adjust brightness on iPhone 13: basic methods

If you are concerned about the brightness of your iPhone 13, then from this article you will learn how to adjust brightness on iPhone 13 screen, or how to prevent automatic brightness reduction. In addition, there are no obvious reasons for reducing iPhone screen brightness, which you did not even guess.

Why is iPhone 13 screen so dark?

The screen of your phone can change its brightness level depending on the lighting. The phone has a built-in ambient light sensor that adjusts the auto brightness.

This means that if you are in a brightly lit place, for example on the street, then the brightness of your iPhone becomes maximum so that you can see everything well.

In a dark room, such as a movie hall or at night, the iPhone screen brightness will be set to the lowest level. This ensures that your eyes will be comfortable looking at the display.

As a rule, problems with auto brightness never arise. However, if the brightness of your iPhone is low or automatically decreases sharply, then most likely the problem is with auto brightness.

How do I adjust the screen brightness on my iPhone?

Let’s start with the basic solutions. If these methods do not help, then we can use additional ways to adjust the brightness of your phone’s screen.

Wipe the top of your phone

It is in the top portion of your iPhone that the ambient light sensor is located, on which the correct operation of the auto brightness depends. While using the phone, skin oil, dirt, and so on may get on its surface. All this can lead to incorrect operation of the light sensor.

Wipe the top portion of your phone with a soft and dry cloth. This will help solve your problem with low iPhone screen brightness.

In addition, a seal-proof case on the phone can also block the operation of the light sensor. Remove it and your problem can be solved.

Adjust the brightness of the iPhone screen manually

There are three ways to adjust brightness of the iPhone screen manually. This can be done through the Control center, through the Settings app, and using Siri.

How do I get to control center on iPhone 13?

  1. Open the Control center. For an iPhone with Face ID, swipe down from the upper-right corner of the screen. For an iPhone with the Home button, swipe up from the bottom of the screen.
  2. Drag the brightness slider up.

Via the Settings app:

  1. Go to iPhone Settings app.
  2. Select the Display&Brightness.
  3. Drag the brightness slider to the right.

Using Siri:

Call Siri in your usual way. Then give one of the commands:

  • Increase screen brightness
  • Set the screen brightness to 75%
  • Set the maximum screen brightness

Restart your phone

If your iPhone is under heavy load during the day, it may give temporary failures. To fix this, it is enough to reboot your device.

Check accessibility settings

In the accessibility settings, there is such a function as Reduce White Point. This feature reduces the intensity of bright colors on the screen, and therefore, even if the brightness of your phone is fully increased, the iPhone screen may fade.

How to turn off Reduce White Point:

  1. Open the Settings and tap Accessibility.
  2. Tap Display & Text Size.
  3. Move the slider of the Reduce White Point function to the inactive state. Alternatively, you can move the slider to the left by 25%, while leaving the function enabled.

Turn off the Low Power mode

If the charge of your phone decreases, then the phone will also automatically reduce the brightness of your iPhone screen, to keep the battery charge as long as possible.

To disable the Low Power consumption mode, you can ask Siri about it or fix it yourself through Settings. To do this, go to Settings / Battery and turn off the switch for Low Power mode.

Screen brightness in some media apps

It may happen that your iPhone is working properly, but the screen brightness in the application itself is reduced. As a rule, in such media applications, the brightness of the screen looks like an invisible slider.

If you see a screen brightness slider in the application or browser, then set it to a level that is comfortable for you. If you don’t see the brightness slider, then try to swipe horizontally or vertically across the screen on the left, right, or lower, upper part of the screen.

Turn off the auto brightness option on your iPhone 13

This is practically the surest way to solve the problem of auto brightness reduction on your iPhone screen.

Disabling the auto brightness setting on your phone is not an immediate solution to the problem of a dark screen. First, try all the methods described earlier.

If none of the methods helped you, only then try disabling the auto brightness option. But remember that the auto brightness feature on iPhone 13 protects your eyes and helps extend the battery life of the iPhone 13.

How to turn off the auto-brightness setting of iPhone 13:

  1. Open the Settings app, and go to the Accessibility menu.
  2. Tap Display & Text Size.
  3. Turn off the Auto-Brightness feature switch.

Now you can manually set the brightness of the iPhone screen dimmer or brighter. To do this, you need to go to the Control center and adjust the screen brightness to the level you need.

Is iPhone 13 screen brighter?

If as a result of one of the actions described above, your phone screen has become brighter, then this is great news.

If nothing helped, then below you will find additional information on how to change the brightness on iPhone 13.

Additional information on how to change the screen brightness on your iPhone 13

In the Settings app in your iPhone 13, you will find a menu such as the Display & Brightness menu, with which you can change various screen settings, including brightness.

One of the parameters of the Display & Brightness menu is True Tone, with which the accuracy of colors on the screen is maintained regardless of the level of external lighting and the brightness level of the screen.

If you tap and hold on the Brightness icon in the Control Center, it will expand to take over the whole screen. Then you will see the following parameters:

  1. Dark Mode – dark mode changes the light backgrounds and menus on the screen of your iPhone 13 to darker ones so that it would be comfortable for your eyes.
  2. Night Shift – this option on iPhone 13 automatically adjust all the colors on the screen to a warmer color palette.
  3. True Tone – if this function is disabled, the phone will automatically adjust the brightness of the phone so that the colors look consistent when the lighting conditions change.

All three parameters can also be found in the Display & Brightness menu in the iPhone Settings app.

Read our article to get an Instruction on how to change caller ID on iPhone.

Conclusion

The brightness of your iPhone 13 screen is automatically adjusted when the lighting changes. For example, in bright light, the iPhone’s brightness is maximum, and in low light, the iPhone’s brightness will be minimal.

Auto brightness is regulated by the phone and is designed so as not to strain your eyesight.

If your phone’s screen dimmer, then you may have problems with auto-brightness. You can solve this problem through the Control center, Settings, or Special Features.

In some cases, simply cleaning the top of your iPhone 13 or restarting it can help you.

Read this article if you want to learn How To Optimize And Extend The Battery Life On iPhone.

13 Best ways how to fix ghost touch on iPhone 11

If you’re dealing with the iPhone 11 ghost touch issue, although it can be frustrating, it’s easy to fix. A simple wipe of the iPhone’s screen or a force restart will help.

I’ve never owned an iPhone 11, but a close friend of mine has. He knows I’m an Apple pro, so he gave me his iPhone to fix when the ghost calls kept coming back. I managed to solve the problem and I have discussed all the tips and tricks that helped you below. Honestly, these methods work for all iPhone models.

Let us begin.

How to fix ghost touch on iphone 11: top 13 advanced tips

Can ghost touch be fixed?

You’ve probably heard many different names people use for “the touch”, but have you ever heard of the ghost touch? Probably not.

Ghost Touch is the term used for the function of your iPhone that performs tasks on its own. You can see how your iPhone permanently opens random apps, accesses a feature, and even calls random phone numbers, all without your input.

How to fix ghost touch on iPhone quickly

What is soul touch?

Since the term “ghost touch” is not widely used, many users do not even know what it means. As mentioned above, performing tasks on your iPhone alone is known as ghost touch. You can think of it as a ghost that touches your iPhone and does things without your intervention.

Ghost Touch can change a number of things on your iPhone. Many users who encounter this problem know that iPhone ghost touch issue has actually performed many tasks on their devices.

Effects on the iPhone

You may be wondering how Ghost Touch can affect your iPhone, since it does nothing but touch your iPhone. Usually you touch something on your device and it performs the action you clicked. With this, you control all the functions of your device.

When a ghost touch occurs on your iPhone, it can perform any action that you as a user can perform. It can open your apps, send messages to your contacts, call your iPhone, change settings options, and more.

It can even format and factory reset your device if it somehow gets into iPhone Settings app and then resets the option. When suddenly the Apple logo appears and the phone goes into force restart, the owner may think that the problem is related to the reboot.

If the ghost touch problems occur frequently on your device, you should look for a solution to fix this iPhone ghost touch issue problem. If you don’t, you may find your iPhone doing things you never intended, like sending emails to your contacts without any content in the body of the email.

If you’re not careful enough to let your iPhone do the work on its own, things can get worse.

How can I permanently fix ghost touch iPhone?

There are many solutions, including:

1. Clear the screen protector

If your iPhone’s screen protector is dirty or has dust spots, these dust particles are likely to be registered as a ghost touch on the screen. In this case, you will see the random movement of a part of the screen by itself.

Take a microfiber cloth and some alcohol and clean the phone’s screen protector thoroughly. Make sure your iPhone is free of dust, dirt or debris, before use. It’s also important to clean your fingers before using your iPhone again.

wiping the screen protector

2. Remove the protective film from the screen protectors

Your screen saver could be to blame, as it can be clunky and thick. It may not register your taps and swipes, causing phantom touches. To fix the iPhone ghost touch problem, remove it. Also, get a new screen protector because of the risk of the screen falling and breaking.

screen protector cleaning

3. Wipe the water from the screen or the frame of the phone

Because it is conductive, it can mimic touch input on a screen. So it gives a spooky ghost tap. For this reason, using your iPhone outside in the rain is not recommended.

Wipe the water drops from the iPhone screen protector and case and make sure it is dry. Dry your hands before using your iPhone again.

The tempered glass protector may be sensitive to water

4. Remove the iPhone case

Your screen saver can also be unofficial. It may be poorly made and may still press against your iPhone 11 screen. Try removing your сase and see if that helps. In this case, you must apply for a new case.

5. Disconnect any external accessories connected to the iPhone

After removing the headphone jack, the only way to connect wired headphones to the iPhone is to use a Lightning to 3.5 mm adapter. Connecting external accessories to the iPhone through the USB port can cause the iPhone display to malfunction.

This is because external accessories draw power from the lighting connector, so fluctuations may occur if the device is not connected properly. Disable it and check if the ghost touch is resolved.

Disable all accessories to rule out hardware issue

6. Force restart your iPhone

You may be dealing with an isolated one-time error. Force restart the device to wipe it.

The hard restart process is different for different iPhone models, but here’s what to do on the iPhone 11:

  • Press and hold the volume up button.
  • Press and hold the volume down button.
  • Press and hold the Side button until the Apple logo appears.

force restart phone screen

7. Update your iPhone to the latest iOS version

If there is a software problem, does the iPhone ghost touch screen disappear by itself? Oh, no. The iOS version on your iPhone may contain some bugs that cause phantom touch problems. Update your iPhone to the latest version to fix possible errors. Start with a stable wi-fi network:

Step 1: Open the Settings app on your iPhone and select General.

Step 2: Click on “Software Update”.

Step 3: If a new update is available for your iPhone, it will be displayed on this screen. Click Download and Install and wait for the installation to complete.

Update software and click import local firmware

8. Reset all settings

You may have tampered with your device’s settings and caused it to bypass and make your screen work again. If you know what iPhone settings you changed, you can easily reset them. If you don’t remember, you need to reset all settings.

Remember that after doing this, you will lose all your saved Wi-Fi passwords, Bluetooth pairing, and VPN settings.

factory resetting from the home screen

If you’re still wondering, here’s how to fix touch ghosting:

In iOS version 14:

  • Go to the Settings app > tap General > Reset.
  • Click on Reset All Settings.
  • Enter your device password to confirm.
  • Reset all iPhone settings.

In iOS version 15:

  • Go to the Settings app > tap General > Transfer or Reset iPhone.
  • Select Reset.
  • Click on Reset All Settings.
  • Enter your device password to confirm.

tap reset all the settings

9. Restore factory settings

None of the above solutions worked? Let’s look at the detailed decisions in this case. First, there is a factory reset.

This will wipe your system to fix any software issues that may be causing the unexpected ghost touch. All your personal data will be erased, so back up your files beforehand.

Here’s what you do:

  • Go to the Settings app > tap General > Reset (or Transfer or Reset iPhone).
  • Click on Remove All Content and Settings.
  • Enter your Apple ID password to confirm.

Your iPhone 11 will restart automatically. I hope your iPhone screen is fixed.

factory resetting your iPhone 11

10. Enter recovery mode

Entering recovery mode is similar to factory reset, but more complete. It can detect and fix other errors that can cause display problems. However, disabling recovery in the middle of recovery can be dangerous, as you may encounter annoying errors.

If you guessed, yes, all your personal information will be deleted. Make a backup of your files beforehand.

To enter recovery mode:

  • Open iTunes on the desktop.
  • Connect your iPhone to your computer via a Lightning or USB cable.
  • Close other running programs. You can interrupt the recovery process.
  • Press the following keys: Hold the volume up key, and do the same for the volume down key. Hold your finger on the power button until the recovery mode screen appears. When the Apple logo appears, ignore it and keep holding.
  • Click restore iPhone.

As mentioned earlier, don’t stop halfway through the Apple logo. If the recovery process is not completed within 15 minutes, the device will exit recovery mode automatically.

Recovery mode screen

11. Use recovery software

Don’t want to enter recovery mode? This is understandable because you will lose all your personal data and run the risk of getting stuck in a boot loop. Fortunately, there is a better troubleshooting solution that does not delete personal data.

This is done with the help of recovery software. Most recovery programs are complete, but you have to purchase them.

I have discussed how to use one of the best, Ultfone:

  • Download and install the program.
  • Connect your iPhone 11 to your computer via a Lightning cable or USB cable.
  • Run the program.
  • On the main page of the program, click the “Start” button.
  • Choose standard repair.
  • Confirm the firmware package to be installed.
  • Click Done

Red apple logo appears

12. Enter DFU mode

DFU restores are more complete than restores. However, entering the device’s firmware update mode is risky because you can lock iOS if you’ve already jailbroken your system.

As with the other troubleshooting methods above, it cleans your system for stubborn software issues that may be causing your screen to malfunction.

Back up your files in advance because all your personal data will be lost.

To enter DFU mode:

  • Open iTunes on your computer.
  • Connect your iPhone to your desktop via a Lightning cable or USB cable.
  • Close all other running programs so they don’t interrupt the DFU restore.
  • Press the following keys: Hold your finger on the power button for a few seconds while holding the volume down key. Hold them for about 10 seconds. Release your finger from the power button, but hold the volume down button for another 5 seconds. If you see a black screen, you have done the steps correctly.
  • Click restore iPhone.

Do not disconnect until iTunes is finished, for the same reasons as you would during a restore.

open iTunes on iPhone 11 same for other models

13. Contact Apple support

If none of the above solutions work, you should contact Apple support. Your ghost touch problem is most likely hardware related. Your phone may have been dropped and severely damaged, and you may need to replace the screen. In some cases related to factory defects Apple provides free screen repair.

  • If your iPhone is out of warranty, it can be expensive to repair.
  • If you’re visiting the nearest Apple Store or retail store near you, make an appointment in advance.

troubleshooting phantom touch on my iphone

FAQ

Why does my iPhone 11 keep ghost touching?

This usually happens when you have adjusted iPhone settings to your liking and recent overrides have messed them up. To fix this, try resetting all settings on your iPhone 11 Pro to erase all current settings, including erroneous system changes that are causing the ghost touch symptom.

Why is my iPhone 11 pressing buttons by itself?

iPhone screen clicking on its own issue can be eliminated by removing all underlying software issues. Just go to all the settings → general → transfer or reset iPhone → tap erase all content and settings.

Why is my iPhone 11 Ghost Touch?

There are many possible reasons:

There may be a film of oil on your iPhone screen. Wipe it well.

Your iPhone case and tempered glass may be unofficial and weak. Tempered glass can be thick and heavy and can put pressure on your screen to cause a phantom ghost touch. Your hard case may be poorly designed and also put pressure on your device’s screen.

The problem may be due to iOS issues. You may not have the latest version, so you’ll need to download the latest operating system through iTunes or your Settings.

The problem may be due to a system error or bug. A force restart helps. If not, you should either do a factory reset or go into Recovery or DFU mode. Don’t get confused about modes and don’t relax when the Apple logo appears.

They may have hacked your mobile settings and caused them to be ignored. If you don’t remember what you changed, go to settings and click Reset settings.

It may be due to a hardware problem. You can drop your iPhone screen and damage it severely.

Learn more about this phenomenon here – Fixing the iPhone 11 Ghost Touch Problem.

iPhone restore screenConclusion

There are many ways to fix iPhone 11 ghost touch screen problem. Solutions depend on the cause and can be as simple as wiping the screen or fixing more complex system errors.

My solutions work not only on iPhone 11 but also on iPhone X and other iPhone models. They also work with other Apple devices, such as the iPad and iPod Touch.

Find out also in our article How to fix iPhone 11 pro overheating.

How to check calculator history on iPhone 11: Quick and easy methods

Have you ever heard that there is a possibility to see the previous calculation on your iPhone Calculator App? This function can greatly help you out, especially when you calculate often.

Read our article and learn to view the calculator history on your IOS calculator app.

Can you find history in calculator memory?

How to check calculator history in your iPhone
How to view history in calculator on iPhone 11

Unfortunately, the Calculator App on your iPhone does not keep the calculator’s history, as it’s a matter of privacy politics. You will not find a detailed history in calculator apps on IOS.

However, it stores your very previous calculations. This can be very helpful as most people forget the last figures of their calculations.

If you’re performing some long and complex calculations, this function can save you time and nerves. You can quickly look through all your past calculator history and continue your accountancy.

How do you check your calculator history?

How to view iPone calculator memory
Viewing past calculations in iPhone

Here are the easiest and most efficient ways that will allow you to check iPhone 11 calculator history quickly. Try them on your iPhone calculators.

  1. Copy the last result

calculator memory function to copy your last result
Copy your result to work with it further

The app icon of the iPhone’s calculator can help you to see and copy your last result. It’s a very quick method. Just follow the simple steps below.

Unlock the iPhone and find the calculator icon on your Home screen. Press it and hold for several seconds.

Then choose the Copy last result option. Thus, it’ll be copied to the clipboard.

Also, here is another way to do the same action. You are able to find calculator app icon in the Control Center. Just like before, long press the app and tap the Copy last result.

  1. Third-party apps

Calculator history to view your past calculations
History can show all your past calculations

Instead of trying to find all your past calculations on your iPhone Calculation App, you can install a third-party Calculator App. These apps can provide you with some unique features. Also, most of the third-party apps are free and available in App Store.

Your entire calculations’ history will be kept in the log file. You are free to open this file at any time without launching the third-party app.

Нere is a list of the most popular and effective Calculator Applications from external developers:

  • ClevCalc
  • Calculator with history
  • All-in-one Calculator
  • The Calculator

    third-party calculator applications
    Third-party calculator apps provide additional features

  1. The memory function in landscape mode

Here is one more useful method to view your past calculations. The memory function allows you to see the results from your current calculations in the calculator memory.

Firstly, unlock your device and open the Calculator App. Type your calculation, as usual.

Keep your iPhone in a landscape position. It will turn the iPhone Calculator App into a scientific calculator that has some interesting features. Here are these useful functions:

  • mr

This function will help you to save the last result of your calculation in calculator memory. If you want to check that result, tap mr button (i.e., Memory Recall).

  • mc

In other words, it’s Memory Clear. It is used to delete the result from the calculator history. Very useful as well.

  • m+

This feature is used to add a current number to the last calculation result kept in calculation history, e.g., if 7 is saved in the memory and you type 3, you’ll get 10 after choosing mr.

  • m-

You can use this feature to subtract a current number on the screen from the result that was saved in the memory, e.g., if 7 is saved in the memory and you type 3, you’ll get 4 after choosing mr.

Memory function in your calculator
Use calculator memory in landscape mode

  1. Recording the calculations

This method is not saving the calculation on your Calculator App, but still, it can be useful. All you need to do is to record all the previous calculations that you need to remember.

Open the Control Center and choose a Screen Recording icon. Thus, the screen recording will get started.

Then just pick up the Calculator icon on your iPhone and manage your calculations. Everything you do will be recorded.

After you’ve done it, tap the recording button in the upper left corner and select Stop screen recording.

Your calculation recording will be saved in the Gallery. You’ll be able to watch it when you need.

View the screen recording to see your past calculations
Screen recording works also with counting

In addition to screen recording, you can simply take a screenshot and then go to the photos app to see the screenshot you have taken.

Frequently asked questions: Calculator history on iPhone

If you still have some questions about finding calculator history on iPhone 11, read this section and try to find your answer.

Does iPhone 11 calculator have history?

No version of Calculator App keeps the whole history of all the calculations. All you can do is follow the instructions above to recall the last calculations on your apple calculator.

How can I install another Calculator App?

You are free to find another Calculation App if the default app doesn’t suit your needs. There are a lot of Calculator Apps on the App Store that you can download free of charge.

To tell the truth, you can download as many calculators on your device as you want. Some of them have history, so you’ll be able to see all the previous calculations.

How can I add the calculator to the Control Center?

If you don’t want to waste your time searching for the calculator on your Home Screen, you can place calculator app icon in the Control Bar and find it quickly.

Find the C/C section in the settings, tap Customize Controls, and swipe to the Calculator. Click on it; thus you’ll have quick access to it.

Also, read this article to learn more about the Ways to See your Calculator History on iPhone.

Final words

Although there is no detailed calculator history on your iPhone, still there are some ways to recall the last calculation. We hope that this article was useful for you, and you’ll be able to check the last iPhone calculation history without a problem.

Also, read our new article to learn How to fix red eye on iPhone 11.

How to fix red eye on iPhone 11: make full use of your smartphone

We can often observe red spots in the place of the pupils of people and animals in photographs taken with flash photography. This makes the image scary and even mystical, and the people in the photo look like vampires. Such a pity when you see the red-eye effect in a successful photo after the fact.

Let’s figure out how to get rid of red eye on iPhone 11 and what programs we need for this.

Where does the red-eye effect come from on the iPhone 11

So, first, let’s understand why the pupils in the photo look red. Probably, you have already noticed a pattern that red eyes appear in photos taken at dusk (low light) and using a flash.

The red-eye reflex is observed when the camera’s flash illuminates the retina, which is full of blood vessels. Red is the color of the blood in these blood vessels.

Perhaps this explanation sounds intimidating, but the red reflex occurs in any healthy eye under similar conditions. It is worth worrying if you observe a red eye reflex in only one of the eyes with the same lighting in both – this may hint at pathology.

How to get rid of red eye on iPhone 11

Does iPhone 11 have red eye correction? If your iPhone is running iOS 7 or later, you don’t need to install third-party software to get rid of red eye. It will be enough to use the built-in Photos App on your device.

Tip: Update iOS if your operating system is out of date – otherwise, nothing will work. To do this, go to Settings, then General Settings. Next, select Software Update and then click on Download and Install.

Use the automatic feature built into the Photos App iPhone 11 to fix red eyes

How do you fix red eye on iOS 11? The easiest way to remove red eye is to use the automatic red-eye correction tool built into the iPhone 11.

To fix red eyes without using third-party tools, open the desired image through the Photos App or Camera App. So, open the Photos App on iPhone, then tap Edit button in the top right corner of the screen of the iPhone Photos App.

Select the Red Eye Reduction tool. It is usually indicated by a strike-through eye icon.

Your smartphone will automatically find the eyes in the photo, and you just have to move the slider in order to reduce the redness of the eyes.

Next, click on the eye icon – this will give you the opportunity to select the desired color of the iris if the redness has occupied not only the pupil. Then click Done in the bottom right corner of the screen to save the photo without red eye.

If you’re on a fairly recent version of iOS but don’t see the red-eye fix icon, don’t worry that this feature isn’t available on your device. If there is no eye icon, most likely your iPhone simply cannot recognize the eyes in the photo. Below is an instruction on how to proceed in this case.

If you’re sure you’re on the correct version of iOS and there is still no eye icon, follow the steps below to remove the red eye issue:

Step 1

Open the Photos App on the springboard of your smartphone. Select the photo on which the red-eye effect is to be edited.

Step 2

In the top right corner of the iPhone Photos App, opened on full screen, you can see the inscription Edit.

Tap Edit button to open the editing tools of the Photos App.

Step 3

After you tap Edit button, the editing tools are now displayed on the screen. You need the top left corner of the screen – the crossed eye icon is displayed there.

Click on this icon to go to fix red eyes to regular ones.

Step 4

Your smartphone will now ask you to highlight the red eyes in the photo in order to understand which area should be corrected.

Click on the area where the red eye is located – and you will see for yourself how it works.

Step 5

Select and deal with the red eye in the photo this way.

Step 6

When you are sure that everything has been done, click on the inscription Done to save the photo in the Photos App. Find this inscription in the bottom right corner of the screen.

You can find the corrected photo in the same place – just open the Photos App on iPhone 11.

In most cases, the built-in smartphone program quickly corrects the red eye in the photo in the way indicated above. If you are in that rare case when it didn’t work, we are happy to offer you alternatives.

How to remove red eyes with a third-party app on iPhone 11

To date, there are dozens of programs for iOS that can remove red eye from any photo. However, such a wide choice increases the chance of downloading a third-party app that will only take up space without coping with its functions.

You can try to find an assistant program in the iOS App Store yourself, or you can use those that we have already rated.

List of verified photo editing software for iPhone 11: red-eye correction without eye drops

Here, we have described third-party apps that will help you deal with red eye. So, how do I get rid of red eye in photos?

Snapseed program

It is one of the most popular red eye remover apps, and it’s fine to use it to remove red eye. Snapseed is available for both iOS and Android and is free.

In addition to a guaranteed red eye correction tool, with this program, you will get 29 different filters and the ability to edit RAW and JPG files.

Fix+ Program

This free app allows you to upload photos and automatically correct defects during processing.

In older versions of the app, it is not possible to select a new color for the iris instead of red eyes, but this feature has already been taken into account in updates.

Pixlr program

Pixlr has a great red-eye tool for iPhone owners. It contains various tools and filters for photo retouching.

The free version of the program allows you to make collages, and add text, stamps, and frames to photos. And of course, Pixlr can easily deal with red eyes on the photo.

Photoshop Express

It is a world-famous photo editor that is available for iOS today. This program is a bit more difficult to work with than the ones described above, but is very versatile and guarantees you the quality of your tasks. Of course, this app has a red eye reduction tool.

How to remove red eye on computer

If photo editing apps on iOS don’t suit you, or you like the big screen when working with images, you can transfer photos from iPhone 11 to your computer to fix red eyes.

The most common method for transferring photos from iPhone is iTunes. However, when using iTunes, the entire photo library (all other photos) is synced. This takes up a lot of space, and the file transfer itself takes time.

To avoid unnecessary manipulation for the sake of editing red eyes on a single photo – do not use iTunes, replace it with another program in this situation.

For example, we recommend using the AnyTrans program for this purpose. This program has similar features to iTunes, but is more flexible when it comes to syncing. It also has additional convenient features.

How do you fix red eye on iPhone video?

The most helpful tip is to turn off your flash. If possible, try adjusting some of your camera’s settings: aperture, shutter speed, and ISO speed, so that you can disable the flash altogether.

Conclusion

We hope that our article helped you perfectly edit photos on your iPhone with red eyes. Now you know how to deal with red eyes using the built-in Photos App for iPhone 11, applications from other manufacturers, and a computer.

We wish you enjoy using your iPhone. Certainly, a good knowledge of its functionality will help you enjoy your smartphone at 100%.